Cisco 827 – Configuring Bridge Mode

Use the Following config to configure your 827 into Bridge Mode :

!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Bridge
!
logging rate-limit console 10 except errors
!
ip subnet-zero
no ip finger
!
no ip dhcp-client network-discovery
bridge crb
!
!
!
interface Ethernet0
no shutdown
no ip address
bridge-group 1
!
interface ATM0

no ip address
no shutdown
no ip mroute-cache
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5snap
protocol ip inarp
!
dsl operating-mode itu-dmt
bridge-group 1
!
ip classless
no ip http server
!
bridge 1 protocol ieee
!
line con 0
transport input none
stopbits 1
line vty 0 4
scheduler max-task-time 5000
end
!