So you want to access the CLI huh?
Well it can be accessed through the web interface by appending /exec to the URL.
Cisco Catalyst Express 500 – Accessing the CLI [sic]
Reply
Category Archives: Uncategorized
ASA 8.x – Authenticating L2TP Remote Access against the Local User Database
When authenticating l2tp-ipsec users against the local database on an ASA, you must use the mschap keyword when creating the user accounts:
username l2tp password secret mschap
1252 LWAPP – Buzzing Access Point
I have been involved with a CUWN deployment using 1252 AP’s in a healthcare environment. Several of the Access-points were making buzzing noises whilst operating but for all intents and purposes were functioning ok.
I knew these units probably needed to be replaced but I hadn’t had the time to report the issue to TAC and get a replacement.
Well apparently I’m not alone. Jeremy at ciscoblog.com has mentioned the same issue showing up in a TAC Field notice. There is even a web tool for checking your serial numbers if they are affected.
The Field notice mentions issues with radio communication whilst buzzing, however I haven’t experienced these issues.
Thanks Jeremy!
Intel S5000PAL – Unknown PCI Device
Bit off topic for this blog but anyway….
If you are setting up a server with an Intel S5000PAL and have an unknown PCI device in the device manager, with the following Device Instance ID:
PCI\VEN_8086&DEV_2681&SUBSYS_346C8086&REV_09\3&11583659&0&FA
The driver you want is the S5000 Based Server AHCI SATA Storage Driver for Windows
